Accessories for controls
€100.00
Product number:
60.303
Product information "Accessories for controls"
Application
WR-Set Type BCR – Designed to work directly with an RWA Control Unit for closing and blocking the natural ventilation under bad weather conditions.
Product features
- Set including: wind sensor, rain sensor, clamp ring, aluminium bracket for pole or wall mounting, without mounting screws
Technical Data of wind sensor:
| Anemometer: | 3 impact resistant wind cups (PA6) |
|---|---|
| Rated voltage: | 24 V DC (+/- 20%) |
| Dimensions (W x H x D): | 250 x 250 x 80 mm |
| Connection Cable: | non-halogen cable, approx. 4 m |
| Measuring principle: | pulse generator |
Technical Data of rain sensor: |
|
| Heated sensor surface : | switch-off delay aprox. 5 min |
| Rated voltage: | 24 V DC (+/- 20%) |
| Current consumption: | < 150 mA |
| Housing: | surface mounting, ABS black with stainless steel bracket |
| Dimensions (W x H x D) : | 100 x 85 x 172 mm |
| Connection Cable: | non-halogen cable, approx. 4 m |
| Contact (volt free): | 1 change over switch, max. 48 V / 5 A |
| Anemometer (WS): | 3 impact resistant wind cups (PA6) |
|---|---|
| Connection Cable (RS, WS): | non-halogen cable, approx. 4 m |
| Contact (RS): | 1 change over switch, max. 48 V / 5 A |
| Current consumption (RS): | < 150 mA |
| Dimensions (WxHxD) (RS): | 100 x 85 x 172 mm |
| Dimensions (WxHxD) (WS): | 250 x 250 x 80 mm |
| Heated sensor surface (RS): | switch-off delay approx.. 5 min |
| Housing (RS): | surface mounting, ABS black with stainless steel bracket |
| Measuring principle (WS): | pulse generator |
| Rated voltage (RS, WS): | 24 V DC (+/- 20%) |
| Volt free contact (RS): | 1 change-over switch, max 48 V / 1 A |